Skip to main content

Nissan reveals front-engined FWD LMP1 for Le Mans

Nissan's all-new contender for outright honours in the Le Mans 24 Hours is a mould-breaking front-engined, front-wheel-drive design.

The Japanese manufacturer confirmed the first technical details of the radical GT-R LM NISMO that will take part in the full World Endurance Championship with a TV commercial shown during the NBC broadcast of the American football end-of-season Super Bowl and a simultaneous virtual launch.



Ben Bowlby, technical director of the GT-R LM project, said that the LMP1 regulations introduced ahead of last season's WEC had allowed Nissan to "turn the whole concept of the conventional LMP1 car of 2014 on its head".

He explained that the revolutionary concept with a three-litre twin-turbo V6 ahead of the driver had been devised to take maximum benefit from the energy retrieved from the car's front-axle kinetic hybrid system.

"It's all about how fast you release the energy — think about a stick of dynamite," he said.
"We want to release the energy very quickly to get the car back up to speed very quickly because it's nice to spend lots of time at high speed.

"The key is to store the energy and then release it very quickly and that's what makes our system very competitive, providing us with a good amount of power from the ERS, which we can add to the internal combustion engine's driving power."

The front-engined concept has allowed Nissan to move the weight bias forward in order to maximise traction.

That explains why the GT-R LM runs the same 14-inch wide Michelin tyres of its rivals at the front, but has nine-inch tyres at the rear.

"This is due to the way that mass is distributed in the car," continued Bowlby.
"We have moved the weight bias forwards to give us traction for the front-engined, front-wheel drive and we've also moved the aero forwards so we've moved the capacity of the tyres forward to match the weight distribution.

Nissan is aiming to run in the highest of the four LMP1 sub-classes, which allows for eight megajoules of energy to be returned to the track over the 8.47-mile lap of Le Mans.
"The more megajoules you have the faster you go," said Bowlby.
"The challenge is to package a big, powerful energy recovery system without going over the weight limit and that is very hard to do."
Nissan has yet to announce how retrieved energy is stored, but it is understood that it is a flywheel system.

The GT-R LM began testing at Nissan's Arizona test facility in November and has subsequently undertaken two tests at the Austin track in Texas.

NISSAN GT-R LM NISMO — Technical Specification

ConfigurationFront-engine. Front-wheel-drive

Engine 
Nissan VRX 30A NISMO: 3.0 litre, 60 degree V6, direct injection gasoline twin-turbo

Transmission 
5-speed + reverse sequential gearbox with pneumatic paddle shift system. Epicyclic final drive reduction with hydraulic limited slip differential. Tilton 4-plate carbon clutch assembly

Chassis 
FIA Homologated weight: 880kg. Right-hand driving position. 68 litre capacity FT3 fuel tank featuring electric lift and feed pumps. ERS housed ahead and beneath driver’s feet in self-contained module.

Bodywork 
Carbon-composite body panels. Polycarbonate windscreen with hard coating CFD and full scale wind tunnel developed ultra high efficiency bodywork geometry, adjustable rear wing.

Suspension 
Penske dampers with four-way adjustment front and rear, hydraulic rear anti-roll bar system.

Brakes 
6-piston front and 4-piston rear calipers. NISMO Brake-by-Wire active brake ERS blending. Driver adjustable brake bias.

Wheels 
BBS centre-lock, magnesium forged 16”x13” front and 16”x9” rear

Tyres
Michelin 31/71-16 front, 20/71-16 rear radials

Electrical 
Cosworth engine control unit featuring: Engine control, gearbox control; Driver adjustable traction control, Anti-lag system control, Brake-by-wire, lift-and-coast fuel conservation, Drive-by-wire throttle control and ERS deployment strategy control

Interior 
NISMO 5-point harness Lifeline lightweight extinguisher system

Data / display system 
Cosworth Electronics with NISMO steering wheel mounted LCD

Dimensions
Length: 4.645m
Width: 1.9m
Height: 1.03m
Minimum weight: 880kg
Full tank capacity: 68L

Comments

Popular posts from this blog

2018 Lamborghini Urus India review, test drive

             On first introduction, it’s a recipe for intimidation. It’s claimed to be the fastest SUV in the world (0-100kph in 3.6sec and a top speed of 305kph puts it nearly in supercar territory), and it’s made by Lamborghini – creator of some of the most savage vehicles on the market. Things – as with any Lamborghini, for that matter – would be a lot less daunting if we were driving on a smooth European country road, a wide motorway, or even a race track. But today we’re driving the Urus on a narrow  ghat  road, as well as through some heavy Pune traffic. Perhaps the intention was to demonstrate that this is the first Lamborghini ever to go on sale in India that truly works in our conditions – but still, I doubt they accounted for rush hour. It’s requisitely mad to look at, employing as many ‘sporty’ design tropes to an SUV body style as possible – the only thing missing is a massive wing on the back; and somehow, it works. It’s ...

Skoda Vision RS concept previews new hatchback

Skoda has set the stage for its forthcoming Volkswagen Golf and Ford Focus rival with the Vision RS, a concept car that features a performance plug-in hybrid (PHEV) powertrain. Under the sporty details and concept flourishes, the Vision RS bears a close resemblance to the Rapid hatchback that will be introduced next year. The fact that it has been previewed in vRS form, complete with 245hp PHEV powertrain, shows how much further upmarket the new Rapid will go compared with the current value-led model. Skoda product marketing chief Björn Kroll said: “The current Rapid is too low-market. For this one, we have tried to balance it out.” Skoda will drop the slow-selling liftback version and concentrate on the Spaceback hatch for the new Rapid. At 4,356mm, the concept is just over 50mm longer than the current Rapid, and it has a 440-litre boot that's up by 25 litres. The concept retains some of the current Rapid’s des...

What to avoid during a car service

                   When it comes to getting their cars serviced at authorised outlets, owners usually go the whole hog. They want their cars coming out of service centres looking brand new, and are willing to pay for it. But do service centres take undue advantage of this? Yes, they do. Servicing may involve changing certain parts and oils after a set interval, but service centres will almost always try to plug in a few extras using technical jargon that a layman may not really understand. Certain processes are completely unnecessary, and customers end up paying extra as they are not aware of what's important and what's not. Also, most of the times, the service associate will throw you a hard sales pitch, and it's not always done with your best interests in mind. So what exactly are the things you don’t really need and should avoid?  Engine flushing Flushing an engine simply means cleaning the impure oil and gunk that ...